474 MJ Tapping Sleeve

Category: .

Product Description

Fabricated tapping sleeve combines the high strength and versatility of fabricated steel with the traditional side and end gasketed mechanical joint design. These sleeves are ideal for potential problem installations where strength, weight and beam load considerations are critical.

High Strength Steel – eliminates stress cracked casting or flange possibility.

True Mechanical Joint Design – industrial grade, fabricated steel body and heavyweight pusher glands prevent the warping and distortion experienced by tapping sleeves using the split steel coupling design. JCM 114 meets design criteria in AWWA C110/111, ANSI 21.10/21.11 for tolerances, dimensions and configuration of the time proven mechanical joint seal. Side and end gaskets provide complete seal around the pipe.

Fabricated Sleeves – provide more strength with significantly reduced weight than a cast sleeve. The lighter sleeve reduces the load on the pipe and aids in installation and handling.
Accommodates Non-Standard Pipe Characteristics – oversize, undersize or irregularities in the pipe O.D. can be accommodated within the fitting increasing performance and safety factor. The JCM 414 is available in larger sizes, non-standard sizes and with many special options (special flanges, special laying lengths, etc.).

Improved Availability – fabricated sleeves with non-standard sizes have a delivery schedule of three to five weeks, significantly less than a cast sleeveā€™s six to nine months.